At Plug The Jack, we are self-service studios. We don't provide sound engineers or mix and master services....

The access codes are time sensitive, which means that they only work at the times corresponding to your booking details (date/time). However, for security reasons, we have established a grace period before/after booking times for the main doors and entrance doors in case, for example, you want to enjoy the lobby after/before your session. Be gentle ...

Our production and recording studios are equipped with an 8 input Focusrite Clarett+ 4pre audio interface, two microphones for your recordings (Sure MV7 & sE2300) and 2 Beyerdynamic DT770 headphones. The control room is equipped with two Focal Evo 65 monitors. We provide all computer connection cables to/from the microphones/console, except for ...

In the event of persistent audio problems in our music studios, we often recommend a last resort: Changing the clock source from 'Internal' to 'S/PDIF', wait 5 seconds for the change to take place then switch back to 'Internal'. This can solve synchronization problems between audio equipment.    ...

First of all, please note that our studios are not equipped with video equipment. If you wish to film or take photos, you'll need to bring your own equipment. Individual Use: For personal and non-commercial purposes, you are allowed to film or take photographs after making your reservation. However, please adhere to our capacity limits and ensure th...

On the Rodecaster Pro screen, press the cogwheel (settings) then Advanced then audio then multi track and activate microSD and USB. If you are recording to a microSD card, the recorded file will be a single file in polywav format. This file can then be imported to your computer either using the Rodecaster's "Podcast Transfer" option or by inserting ...

The studio setup is not complex but since there is not any on-site assistance available to teach you how to operate your computer and chosen software, we strongly advise that you become proficient before utilizing our Recording studios. If you're already familiar with your software, you'll find it easy to adapt to using our studios....

With some old versions of McAfee antivirus, users might have issues and blue screens while installing focusrite driver. Folluw this link to solve the problem .  ...

We recommend that you set the 3 microphone buttons to the middle position. Which means : Having the input gain at 0db. The directionality of the microphone is cardioid. And no EQ. Record your vocals in mono in your DAW.  ...

Prefer automatic mode when using air conditioning or heating (select AUTO function and the desired temperature between 17 and 20°C). Please note that it can take up to 5 minutes for the heating/air conditioning system to start up properly, so be patient and try not to turn the system off too often as this could damage it. When it is a bit cold, reme...

Try removing the two Jack cables from the back of the interface and reinserting them firmly. Make sure they are connected exclusively to LINE OUTPUTS 1-2....

Plug the microphone directly into Channel 1 on the interface.Activate the 48V button located beside Channel 1 on the interface.Ensure that Channel 1 is selected as the input source for the microphone track (avoid Channel 1-2, as it's designated for stereo).Confirm that all switches on the microphone are set to the middle position and that the gain s...

 ...

Plug The Jack does not offer courses or lessons. We let you progress at your own pace when it comes to using the equipment we provide, as learning is part of the creative process. There are many tutorials on the internet to help you with hardware/software and production techniques. ...

At Plug The Jack, we've equipped some of our studios with the DJM-A9 and DJM-900 NX2 mixers: some serious gear! Thanks to Pioneer's DJM-REC application, you can broadcast live on the platforms of your choice or simply record your mix in professional quality. However, it should be noted that this application is only available on iOS (Apple and iPad)....

Make sure your CDJ and DJM are switched on (rear control). Check that the CDJ audio outputs are connected to the DJM 'Line In' input (channel 2 and channel 3) using the red and white RCA cables. Set the DJM output channels to 'Line' mode. Set the 'Balance' knob to the center position (12h) for a balanced output level. Adjust the 'Trim' knob of each ...

We have an absolute zero tolerance for drug use. Anyone using illegal substances or drugs in or around our premises will be immediately and permanently banned from our community. Our surveillance team is on duty 24/7....

Our rehearsal spaces measure between 15 and 35 m2 depending on the type of studio chosen. They are equipped with a full sound system, drums, microphones and amps for guitars and basses. Each studio also contains a keyboard stand and a 10 input analogue mixer. In all of our rehearsal rooms there is a stage keyboard available....

Laptop :1) Install the driver DJM Nexus from Pioneer before your session on your laptop2) connect the USB cable from the DJM to your laptop3) open your DAW (Audacity, Reaper, Ableton…) - arm a recording track4) go to preference system Audio and select the DJM pilot Mobile :On your phone, you can use DJM Rec if you're on IOS and on the DJM-900NX2. Do...

Check that the headphones are plugged into the headphone port located on the front side of the Focusrite interface.Confirm that the headphone volume control on the interface is adjusted to an appropriate level. ...

To connect the MIDI keyboard to your DAW, follow these steps:1. Use the provided USB cable to link the MIDI keyboard to your computer's USB port. Once connected, you'll notice the keyboard lighting up to indicate power. If the MIDI keyboard fails to power up upon connection, verify whether you're using a USB hub. If so, attempt connecting the keyboa...

Our recording studios are designed for a maximum capacity of 5 people. In Antwerp, we have two XL studios for up to 8 people. Failure to comply with the maximum capacity allowed is a breach of our terms and conditions and may result in account suspension and a fine....

For Brussels: Our standard rehearsal rooms are equipped for a maximum capacity of 6 people and our XL rehearsal rooms for a maximum capacity of 10 people. For Antwerp: Our standard rehearsal rooms are equipped for a maximum capacity of 7 people, our XL rehearsal rooms for a maximum capacity of 9 people and the XXL rehearsal room for a maximum capaci...

At Plug The Jack you are your own sound engineer and you are totally autonomous. ...

Before entering one of our recording studios, please make sure you bring :1. Your laptop with the latest Focusrite Clarett 4Pre+ driver.2. And a recording software (DAW) Here you'll find a detailed list of the equipment available in our recording studios. If you require additional equipment, please bring it with you. ...

Our rehearsal studios are fully equipped with amps, drums and a full sound system including a USB mixer, vocal microphones and active monitors. There are plenty of options for plugging in your equipment if you need to. Just bring your own instruments and plug the jack. We do not provide drumsticks, so bring your own. A keyboard stand is available in...

A podcast studio is approximately 12 m2 and the entire environment and design has been designed to allow for total immersion during your podcast sessions. The intensity of the lighting in your studio and the temperature of the air conditioning can be adjusted to your liking. Each podcast studio is equipped with 4 leather seats arranged around a podc...

Every DJ studio at Plug The Jack is equipped with the very best in DJ equipment. The equipment, the incredible acoustics and the light show have been designed to provide a stunning experience and allow you to work your sets in the best conditions. Each studio is equipped with the following DJ equipment: 2 Pioneer CDJ-3000 professional multi-format D...

First and foremost, you should always start each session with resetting to factory default the sound interface. This will prevent and solve 99% of problems. To do this, download Focusrite Control and reset the interface to its factory settings.  If this is the first time you've downloaded Focusrite Control, you may need to restart your computer for ...

Adjust the gain dial for Channel 1 to a moderate level. Aim for a green flash of light around the dial while speaking into the microphone; if it turns red, slightly reduce the level.Verify that all switches on the microphone are positioned in the middle. Confirm that the gain switch is set to 0dB.Create a new mic track without applying plugins or ef...

If no sound comes out of your speakers, check the following :Check at the back of the speakers if the speakers are on. There should be a green light on their front.Check that mixing console volume levels are correctly set and that gain is sufficient. Check if the two Jack cables are properly connected to LINE OUTPUTS 1-2 on the back side of the inte...

Our podcast studios are equipped for 4 podcasters and have a maximum capacity of 6 people. For your own safety, please do not accommodate more than 6 people in a recording studio. Failure to comply with the maximum permitted capacity is a violation of our terms and conditions and may result in account suspension and a fine....