Please fill out the contact form below and we will reply as soon as possible.
A podcast studio is approximately 12 m2 and the entire environment and design has been designed to allow for total...
April 2nd, 2024 183 views 0 likes
Our podcast studios are equipped for 4 podcasters and have a maximum capacity of 6 people. For your own safety,...
April 2nd, 2024 185 views 0 likes
On the Rodecaster Pro screen, press the cogwheel (settings) then Advanced then audio then multi track and activate microSD and...
April 2nd, 2024 266 views 0 likes
If you are going to record on a micro-sd card:A micro-sd card If you are going to record on a...
April 12th, 2024 218 views 0 likes
Connect the USB C cable on the back of the Rodecaster to your laptop.Set your laptop's input/output device to "Rodecaster...
April 12th, 2024 210 views 0 likes
Insert a micro sd card into the back of the rodecaster pro.A micro-sd LED should light up in the top...
April 12th, 2024 156 views 0 likes
Microphone level is set by the faders on the left.
April 12th, 2024 169 views 0 likes
Headphone level is set by the knobs on the top right.
April 12th, 2024 186 views 0 likes
It's probably a USB problem. Try another cable.
April 12th, 2024 151 views 0 likes
At Plug The Jack, we're self-service studios. We don't give lessons, and we won't help you record your podcast.That said,...
April 12th, 2024 180 views 0 likes
Yes, it is possible to connect a phone (or other devices) to the Rodecaster pro via bluetooth.To do so :Press...
April 12th, 2024 212 views 0 likes
To increase the brightness of the Rodecaster pro, simply follow these steps: Click on the Settings icon located on the...
April 12th, 2024 184 views 0 likes
Yes, pressing and holding the rec button will pause the recording. You'll see a pause signal at the top left...
April 12th, 2024 227 views 0 likes
To modify soundpad sounds, follow this tutorial https://www.youtube.com/watch?v=tvt1ts4oFRA
April 12th, 2024 217 views 0 likes
Resetting the Rodecaster Pro will resolve the vast majority of bugs and problems encountered. To do this, go to Settings ->...
April 12th, 2024 167 views 0 likes
There are all the cables needed to interconnect the machines, plus a usb A to connect your pc to the...
April 18th, 2024 174 views 0 likes